Kategória: Lakás, otthon, kert, barkács
Honlap:
Részletek... Set for easy installation of water heating in boilers and other devices. The kit consists of 6 mono-crystalline 450Wp Trina panels with N-Type i-TOPCon black frame technology ( 6x 04280455 ) with 450W power each, a GETI controller GWH02D 4000W ( 1x 04291121 ) and a complete 25m long wiring harness ( 25x 04290190 + 25x 04290189 ) with included MC4 connectors ( 2x 03360241 + 2x 03360240 ). Please note: The GETI GWH inverter is only suitable for resistive loads with a bimetal thermostat (not suitable for electronically controlled thermostats!). The output of the inverter (L, N) must not be connected to the mains or earth! The inverter output must not be connected to a TN-C system. The inverter is equipped with a large easy to understand LED display, a 3m temperature sensor and independent temperature setting for heating water from both PV and AC mains. The GETI inverter also has a forced heating function. The inverter is compatible with most boilers on the market. The system is simple , it only requires the connection of an appropriate number of PV panels with a maximum output of 4000 W with an operating voltage of 160 ~ 350V DC, 230C AC mains voltage and connection to a resistive load, e.g. heating coil, electric boiler, electric radiator or underfloor heating and circuit breakers. The DC current generated in the panels, which cannot be fed directly to the heating equipment, is converted in the inverter into AC current which can be used to power the heating equipment. The maximum output of the system is 4000 W. The inverter has a priority input from the photovoltaic panels and in case of power shortage on these panels, the system is backed up by 230V AC mains power. - This is an oversized item and is not covered by free shipping. Delivery time from order creation can be extended by 3-4 working days. Product parameters: - solar inverter for hot water heating with resistive load (heating coil, boiler) - temperature sensor - separate temperature setting for heating water from PV or AC mains - automatic switching between networks (PV / 230V AC network) - operating modes: PV only as an island system or or automatic mode PV + grid - silent operation for passive cooling - efficient monitoring of the maximum power output on the panels using MPPT - high efficiency > 99% The GETI GWH02D inverter is equipped with a clear LED display that informs the user of the current and set values: - Indication of water heating from PV panels - 230V AC mains water heating indication - water temperature (PV,AC) current and set - PV power - PV voltage - comparison indication - error status indication Technical parameters: - Input voltage (VDC): 160 to 350 (VDC) - Input voltage (VAC): 230 V AC - output voltage [VAC]: 0-260 VAC (VAC) - Maximum power: 4000 W - PV input current: 20A max. - 20A max. - Load type: resistive with bimetal thermostat (not suitable for electronically controlled thermostats!) - The value of the resistive load must not be less than 13 Ohm - MPPT function: YES - PV panel connection: series or series-parallel - Priority input: PV panels - backup input: 230V AC mains - operating temperature: -25 °C ~ +55 °C - efficiency: > 99% - Length of temperature sensor: 3m - cooling: passive - input short circuit protection - overheating protection - PV panel input connection: MC4 connectors - 230V AC input connection: screw terminal - 230V AC output connection: screw terminal - Material: aluminium + metal - degree of protection: IP65 - Dimensions d x w x h [mm]: 255 x 201 x 95 mm - weight: 3 kg Photovoltaic panel 450W Trina Solar TSM-NEG9R.28, Vertex S+ Dual Glass N-Type Technical parameters: - Rated power: 450 W - Type: N-type, Topcon, monocrystalline - module efficiency: 22,5 % - maximum current (Imp): 10,09 A - Maximum supply voltage (Vmp): 44,6 V - No-load voltage (Voc): 52,9 V - Short-circuit current (ISC): 10,74 A - Maximum system voltage: 1500 VDC (IEC) - MC4/MC4 compatible connector type - Front glass: 1.6 mm thermally reinforced glass with high transparency - degree of protection: IP68. - 144 cell count. - Dimensions: 1762 x 1134 x 30 mm - weight: 21 kg - frame: anodized aluminium alloy - frame colour: black WARNING! The system is designed for resistive loads only. - It is recommended that only an electrician with the appropriate qualifications for working with electrical equipment and experience with photovoltaic systems perform the installation and wiring. The kit includes: 6 monocrystalline 450Wp Trina PV panels with N-Type TOPCon black frame technology Solar controller GETI GWH02D Cable set 25 meters MC4 connectors Installation instructions
