Kategória: Lakás, otthon, kert, barkács
Honlap:
Részletek...Voltage converter SINUS Phoenix 1200VA 24V VE.Direct Victron Energy 24V/1200VA VE.Direct. Fully programmable 24V/1200VA pure sine wave inverter with toroidal transformer, built-in VE.Direct interface and ECO mode. The Victron Energy voltage converter is an efficient and reliable voltage converter built on a proven and field-tested platform. The inverter incorporates a robust toroidal transformer that has proven its reliability in Victron Energy inverters for many years. Product parameters: - Easily accessible terminals: installation is easier than ever because terminals are now more accessible to the installer. VE.Direct: The VE.Direct port can be connected to: - computer (VE.Direct to USB interface cable required) - Smartphones, tablets, MacBooks and other Apple and Android devices (VE.Direct Bluetooth Smart dongle required) Fully configurable: - Low battery alarm triggering and level reset - Low battery shutdown and restart levels - Dynamic shutdown: load-dependent shutdown level - output voltage 210 - 245 V - frequency 50 Hz or 60 Hz - ECO mode on/off and ECO mode sensing level Tracking: - Input and output voltages, % load and alarms Proven reliability: - Full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature. High starting performance: - Required to start loads such as inverters for LED bulbs, halogen bulbs, refrigerators or power tools. ECO mode: In ECO mode, the inverter switches to standby mode when the load drops below a preset value. In standby mode, the inverter turns on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off: The remote switch can be connected to the two-pole connector or between the battery plus and left contact of the two-pole connector. LED diagnostics: The status LEDs can be used to diagnose the device, see instructions for use. Victron Connect: The VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port. Technical parameters: - 230 V AC +/- 3% 50 Hz or 60 Hz +/- 0.1%. - continuous power at 25 ?C: 1200 VA / 1000 W - Peak power: 2200 W - max. efficiency: 91% - self-consumption at zero load: max 8 W - self-consumption in ECO mode: max 1.5 W - 230 V AC connection: Schuko (CEE 7/4) - Operating temperature range: -40 to +65?C (fan-assisted cooling) - Humidity (non-condensing): max. 95% - Protection class: IP21 - weight: 7.4 kg - Dimension: 117 x 232 x 327 mm
