Kategória: Lakás, otthon, kert, barkács
Honlap:
Részletek... Victron Energy 24V/2000VA Smart inverter Fully programmable 24V/2000VA inverter with pure sine wave, built-in Bluetooth Smart, wireless setup and ECO mode. The Victron Energy Smart voltage converter is an efficient and reliable voltage converter built on a proven and field-tested inverter platform, but in a new design with an all-metal housing. It is powerful enough to power most common appliances in a car, boat, RV or home. The toroidal transformer provides high peak power surge capacity, stable voltage, frequency and high quality sine wave. Product Parameters: Easily accessible terminals: Installation is easier than ever because the terminals are now more accessible to the installer. Built-in Bluetooth: Fully configurable via tablet or smartphone, configure alarms, alarm relays, voltage interrupts, output voltage, frequency, eco-mode and more directly from the app from VictronConnect. - Low battery voltage alarm - Low battery shutdown and restart levels - Dynamic shutdown: load-dependent shutdown level - output voltage: 230 VAC ?2% - Frequency: 50 Hz or 60 Hz - ECO mode on/off and ECO mode sensing level - alarm relay - monitoring: input and output voltage, load and alarms VE.Direct: Using the VE.Direct port, you can connect to a computer (VE.Direct to USB interface cable required) and configure and monitor the same parameters. Proven reliability: The full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature. High starting performance: Required to start loads such as inverters for LED bulbs, halogen bulbs, refrigerators or power tools. ECO mode: In ECO mode, the inverter switches to standby mode when the load drops below a preset value. In standby mode, the inverter turns on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off: A remote switch or relay contact can be connected to the two-pole connector. Alternatively, the H terminal (left) of the two-pole connector can be switched to battery plus or the L terminal (right) of the two-pole connector can be switched to battery minus. LED diagnostics: The status LEDs can be used to diagnose the device, see the instruction manual. Victron Connect: The VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port. Technical parameters: - Output voltage: 230 V AC ? 2% 50 Hz or 60 Hz ? 0.1%. - continuous power at 25 ?C: 2000 VA / 1600 W - Peak power: 4000 W - max. efficiency: 94 % - self-consumption at zero load: max. 9 W - self-consumption at zero load in ECO mode: max. 1.3 W - 230 V AC connection: screw terminals - Operating temperature range: -40 to +65?C (fan-assisted cooling) - Humidity (non-condensing): max. 95% - protection class: IP21 - weight: 13 kg - Dimension: 485 x 219 x 125 mm
